1. Skip to Menu
  2. Skip to Content
  3. Skip to Footer

Hotline: 0902.966.449 - 0934.997.701  - Email: pronetviet@gmail.com

Danh mục sản phẩm

Hỗ trợ trực tuyến

Zalo 0902966449

NetVietPro

Mr.Công

Sản phẩm mới nhất

CISCO NM-16ESW mới giá rẻ

0 VNĐ
Manufacturer: Cisco Device Type: Switch - 16 ports - Managed Enclosure Type: Plug-in module Inter...

Xem thêm...

CISCO HWIC-4A/S mới giá rẻ

0 VNĐ
Manufacturer: Cisco Device Type: Serial adapter Form Factor: Plug-in module Dimensions (WxDxH): 7...

Xem thêm...

CISCO HWIC-4T mới giá rẻ

0 VNĐ
Manufacturer: Cisco Device Type: Serial adapter Form Factor: Plug-in module Ports: RS-232/449/530...

Xem thêm...

CISCO HWIC-4ESW mới giá rẻ

0 VNĐ
Nhà sản xuất: Cisco Loại thiết bị: Switch - 4 cổng - Quản lý Loại Enclosure: Plug-in module Giao ...

Xem thêm...

CISCO HWIC-1ADSL mới giá rẻ

0 VNĐ
Manufacturer: Cisco Device Type: DSL modem - HWIC Form Factor: Internal Max Transfer Rate: 24 Mbp...

Xem thêm...

Chúng tôi xin thông báo: kể từ ngày 23/9/2015, mọi giao dịch sẽ chuyển sang địa chỉ: 447/23 Bình Trị Đông ( Đất Mới ) – Phường Bình Trị Đông A – Quận Bình Tân – TP. Hồ Chí Minh.

Media Convert Quang ANET - AN-UM130SM-20 WNM 20KM - 1 core

Media Convert Quang ANET - AN-UM130SM-20 WNM 20KM - 1 core Media Convert Quang ANET - AN-UM130SM-20 WNM 20KM - 1 core Media Convert Quang ANET - AN-UM130SM-20 WNM 20KM - 1 core
Đơn giá: 250.000 VNĐ
Số lượng: 

Media Convert Quang ANET - AN-UM130SM-20 WNM 20KM - 1 core

Description

The AN-130/150 converter complies with IEEE 802.3 standards. It is designed to convert data signal between 10/100 Base-TX and 100 Base Fx Fast Ethernet. The media converter is connected between Fiber cable and twisted cable segments with network operating smoothly.

This converter can be used as a standard alone unit or a slide-in module to fit the 19 converter rack.

Adopting WDM technology, AN-UM130-20 & AN-UM150-20 takes only one fiber cable to transmit and receive data, which will save half cabling cost for you.

BiDi WDM - Wave Division Multiplexing Technology allows you use just a 1 fiber cable instead of 2, because transmit and receive channels are separated by different wavelenghts.

Converters universal - they can work as standalone modules in point to point applications with external power supply modules - or same converter can be used as a plug in module in AN-CH05 14 slot chassis. Such universal design, made by AD-net saves a lot of money and time to your network planning - you no need thing, how much units you need as standalone and how much units you need as plug in modules in chassis - just order same module and decide later. 

Also, it does not matters, what type of TX/RX are you using at central side or remote side, they will always operate smooth.

Features
  • Complies with IEEE802.3 and IEEE802.3u 10/100Base-TX and 100Base-FX
  • MTU size supported 1600 bytes maximum
  • Supports pure converter mode data forwarding for extreme low latency
  • Built in 128Kb RAM for data buffer
  • Supports modified cut-through frame forwarding for low latency
  • Optional forward fragments
  • 10/100Mbps and full/half duplex automatically configure in TP port
  • Supports end fault function (optional)
  • MDI/MDI-X Auto Negotiation
  • Support EEPROM configuration
  • LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL. 
  • FCC Class A & CE approved  
  • LLR, LFP - Link Loss Return (LLR), Link Failure Pass (LFP) features supported (please mention this when place order or require price, by default this feature is not included)
  • RoHs compliant
  • Only 1 fiber used instead of 2 - WDM BiDi technology
  • Stainless steel parts (value added feature)
  • Standalone, Wallmount or Hotpluggable in 19' chassis - universal design
Specification

Wavelength: TX1310nm/RX1550nm; TX1550nm/RX1310nm, for high distance TX1490nm/RX1550nm; TX1550nm/RX1490nm

Technical:
BER: <1E-8
Data Buffer: 128Kb
Power temperature variation: 02mw/
Input Power Range (dBm): 0~-40
Imax: 800mA
Power: 2.5 W
High perfomance ICPLUS IP113C or RTL8306G chipsets based

Fiber cable(m): 8.3/125, 8.7/125, 9/125 or 10/125single-mode, only 1 strand is needed

Maximum distance: 120 km (available ordering options 20/40/60/80/100/120 km) 

Input power: IA@+5VDC or 110~260VAC or 48VDC

Dimensions: 95×70×26mm (external power),  95×70×26mm (external power )

Environment:
Relative humidity;5% to 90%
Operating temperature: 0 to 70 degrees
Storage temperature : -20 to 70

AN-UM130_scheme.jpg

CE_web_1.jpg  fcc_web_1.jpg  rohs_web_1.jpg

 



Copyright MAXXmarketing Webdesigner GmbH