Cisco 3945 Router w/SPE150(3GE,4EHWIC,4DSP,4SM,256MBCF,1GBDRAM,IPB)
The Cisco 3945 router, modular Services Performance Engine (SPE) 150, which can be upgraded for even higher performance as next-generation WAN environments evolve.
Figure 1 shows the appearance of the CISCO3945/K9.
Table 1 shows the Quick Specs of the CISCO3945/K9.
Services Performance Engine module
3 integrated 10/100/1000 Ethernet ports with 2 ports capable of RJ-45 or SFP connectivity
4 service module slots
1 Internal Services Module slot
4 onboard digital signal processor (DSP) slots
4 Enhanced High-Speed WAN Interface Card (EHWIC) slots
1 GB (installed) / 2 GB (max)
256 MB (installed) / 8 GB (max)
47.6 cm x 43.8 cm x 13.3 cm
Figure 2 shows the front panel of the Cisco 3945 router.
① On/Off switch ② Power connector ③ LEDs area
Table 2 shows the LEDs area description.
SYS status LED
Solid green indicates normal operation.
System is booting or is in ROM monitor mode.
Power is off or system board is faulty.
ACT status LED
Solid or blinking green
Solid or blinking indicates packet activity between the forwarding and routing engine and any I/O port.
No packet transfers are occurring.
IP phone power is on.
IP phone power is not on.
PS1 / PS2
System is running.
System is not running.
Figure 3 shows the back panel of the Cisco router 3945/K9 with LEDs.
① Compact flash 0 and 1 (0, right) ② ISM ③ PVDM3 0,1,2 and 3 (0, far right) ④ EN (Enable USB console)
⑤ EN (Enable RJ-45 console)⑥ SFP S ⑦ SFP EN ⑧ S (Speed) ⑨ L (Link)
Table 3 shows the description of these LEDs on the back panel.
Flash memory is busy.
Initialized with error.
Blinking Green then turns off
CompactFlash is ready for removal.
1 blink + pause
GE port operating at 10 Mb/s.
2 blink + pause
GE port operating at 100 Mb/s.
3 blink + pause
GE port operating at 1000 Mb/s.
GE link is established.
No GE link is established.
EN (RJ-45 console port)
The RJ-45 console port is active.
EN (USB serial console port)
The USB console port is active.
PVDM3 0,1,2 and 3
PVDM is initialized.
PVDM is detected but not initialized.
No PVDM installed.
Blinking frequency indicates port speed.
Present and enabled.
Present with failure.
Figure 4 shows the back panel of the Cisco 3945 router with slots and ports.
Hàng New 100%, Bảo hành 12 Tháng.
Trụ sở: 447/23 Bình Trị Đông ( Đất Mới ), Phường Bình Trị Đông A, Quận Bình Tân, TP. Hồ Chí Minh
NETVIETPRO – Chuyên buôn bán, thanh lý thiết bị mạng, thiết bị viễn thông …….
Mobil : 0902 966 449 – 0934 997 701
Skype ID : netvietpro.com
Gmail : firstname.lastname@example.org
Website : www.netvietpro.com – www.phukienquang.com.vn
Uy tín đi đầu – Giá Cả hợp lý – Sản phẩm Chất lượng.
Switch Cisco ME-3400G-2CS-A
Cisco ME 3400 Series is the first access switch family optimized for both the Ethernet-to-the-Home (ETTH) triple play services and Ethernet-to-the-Business (ETTB) VPN services.
LINKSYS EA6700-Wifi Dual band N1750Mbps
• 802.11ac, backward-compatible with a/b/g/n Devices
• Linksys Smart Wi-Fi
• Data rates up to 450 Mbps (2.4 GHz) and 1.3 Gbps (5 GHz)
• Four 10/100/1000 Gigabit Ethernet Ports
• Two (2) USB Ports (USB 2.0 and USB 3.0)
SWITCH CISCO LINKSYS SF90D-08
– 8 Port 10/100 Mbps with MDI and MDI crossover (MDI-X); auto negotiated port.
– Performance: Switch capacity 1.6 Gbps, Forwarding capacity(base on 64-byte packets) 1.4. mpps
Switch Linksys SE4008 WRT 8-Port Gigabit
Tốc độ 1000 Mbps
8 Gigabit Ethernet auto-sensing ports
Quality of Service (QoS) traffic prioritization
Bộ định tuyến không dây LINKSYS EA4500
– Tốc độ Wifi: Băng tần kép Wifi 450+450Mbps
– Cổng LAN: 4 cổng 10/100/1000Mbps
– Ăngten: 6 Ăngten ngầm