Module quang NSN 1000 BASE-T Copper SFP (MXP-24RJX)

NSN 1000BASE-T copper SFP transceiver is based on the SFP Multi-Source Agreement (MSA). They are compatible with the gigabit ethernet and 1000BASE-T standards as specified in IEEE Std 802.3:2000, which support 1000Mbps data-rate up to 100 meters reach over unshielded twisted-pair category-5 cable.

There are total five kinds of products for selection in this series: MXP-24RJ, SERDES interface with auto-negotiation
enabled default. MXP-24RJND, SERDES interface with auto-negotiation enabled default, and supports RX_LOS as link indication
function. MXP-24RJFD, SERDES interface with auto-negotiation disabled default, and supports RX_LOS as link indication
function. MXP-24RJS, SGMII interface with auto-negotiation enabled default. MXP-24RJSD, SGMII interface with auto-negotiation
enabled default, and supports RX_LOS as link indication function.

The transceiver supports 1000Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The transceiver provides standard serial ID information compatible with SFP MSA, which can be accessed with address of A0h via the two-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via two-wire serial bus at address ACh.

* LAN 1000Base-T
* Switch to Switch Interface
* Router/Server interface
* Switched backplane applications

* Compatible with SFP MSA
* Compatible with IEEE Std 802.3TM-2002