| Technical Detail | | | Specification | | Manufacturer | Cisco | | Manufacturer Part # | WS-C3750-24PS-S | | Device Type | Switch – 24 ports – L3 – Managed – stackable | | Enclosure Type | Rack-mountable 1U | | Interfaces | Fast Ethernet | | Ports | 24 x 10/100 (PoE) + 2 x SFP | | Power Over Ethernet (PoE) | PoE | | MAC Address Table Size | 12K entries | | Routing Protocol | RIP-1, RIP-2, EIGRP, static IP routing, RIPng | | Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH | | Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s | | Power | AC 120/230 V ( 50/60 Hz ) | | Dimensions (WxDxH) | 44.5 cm x 30 cm x 4.4 cm | | Weight | 5.1 kg | | Manufacturer Warranty | Limited lifetime warranty | | General |
|---|
| Device Type | Switch – 24 ports – L3 – Managed – stackable | | Enclosure Type | Rack-mountable – 1U | | Subtype | Fast Ethernet | | Ports | 24 x 10/100 (PoE) + 2 x SFP | | Power Over Ethernet (PoE) | PoE | | MAC Address Table Size | 12K entries | | Max Units In A Stack | 9 | | Routing Protocol | RIP-1, RIP-2, EIGRP, static IP routing, RIPng | | Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH | | Authentication Method | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ | | Features | Flow control, full duplex capability, Layer 3 switching, auto-sensing per device, IP-routing, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, stackable, IPv6 support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS) | | Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s | | RAM | 128 MB | | Flash Memory | 16 MB Flash | | Status Indicators | Port status, link activity, port transmission speed, port duplex mode, status | | Expansion / Connectivity |
|---|
| Interfaces | 24 x 10Base-T/100Base-TX – RJ-45 – PoE 1 x console – RJ-45 – management Network stack device 2 x SFP (mini-GBIC) | | Power |
|---|
| Power Device | Internal power supply | | Voltage Required | AC 120/230 V ( 50/60 Hz ) | | Power Consumption Operational | 495 Watt | | Features | Redundant Power System (RPS) connector | | Miscellaneous |
|---|
| MTBF | 209,170 hours | | Compliant Standards | FCC Class A certified, TUV GS, BSMI CNS 13438 Class A, CISPR 24, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024, UL 60950 Third Edition, CISPR 22, CSA 22.2 No. 60950, CB, FCC Part 15, MIC, AS/NZS 3548 | | Software / System Requirements |
|---|
| Software Included | Cisco IOS IP Base | | Dimensions & Weight |
|---|
| Width | 44.5 cm | | Depth | 30 cm | | Height | 4.4 cm | | Weight | 5.1 kg | | Manufacturer Warranty |
|---|
| Service & Support | Limited lifetime warranty | | Service & Support Details | Limited warranty – lifetime | | Environmental Parameters |
|---|
| Min Operating Temperature | 0 °C | | Max Operating Temperature | 45 °C | | Humidity Range Operating | 10 – 85% | | Max Altitude Operating | 3 km |
|
|